Multi-Source Rechargeable EDC Flashlight
Three-in-One Spot/Flood/Aux light with moonlight, low, med1/med2, high, turbo and dual flood/spot modes. Enjoy up to 38 hours of 1-lumen moonlight mode from the 18650 USB-C battery (2 hour charge time), the 0.5 lumen multi-color AUX mode, up to 3200 lumen max (turbo) floodlight, or the 900 lumen spotlight mode. Carry the portable handheld frame measures 3.75 inches tall by 1.90 inches wide by 1.14 inches thick with the included wrist lanyard or strap the device to a belt or bag with the included belt loop.
- Design
- Ease of Use
- modes/function
- Portability
- Cost
Watch Out John Conner, you cannot hide from this Terminator.
Over the past several years, I have grown to appreciate several brands of flashlights (AceBeam, Olight, Fenix, and Nitecore to name a few). The LED and battery technology have advanced significantly when compared to the ridiculously large D-cell battery-powered lights of my childhood. I remember the lights were more like clubs/weapons than illumination sources. Additionally, our junk drawer/cabinet was rife with C and D-cell batteries.
Thanks to rechargeable LiPo batteries, many modern LED lights push well past their weight/status and provide copious amounts of light. Many brands offer small lights, larger lights, flood lights, spotlights, and various specialty lights for work, photography, and even underwater (BigBlue, Sola, and Halcyon, as examples). If you want/need a spot or flood, you must purchase multiple devices. Luckily, AceBeam provides a jack-of-all-trades spot/flood option in their Terminator M2 light. Pick up an extra battery and enjoy the equivalent of two lights in one convenient shell.
The ACEBEAM Terminator M2 arrived in a 3 1/4 inches wide by 4 5/8 inches tall by 1 5/16 inches thick hanging style package. The cover panel had an eye-catching blue-to-orange iridescent transitional gradient, which proved to be a very pleasing feature. The orange/white company name was listed along the top left, followed by four orange icons along the right side of the panel.
The icons detailed the 5-year warranty, floodlight feature, spotlight feature (500m/62500 candella throw), and AUX-light features. The Terminator M2 name was listed along the bottom of the panel in bold white font. Beneath the name, you will find a brief descriptor of the light “Multi Light Sources EDC Flashlight Throw/Flood/Signal/Rainbow.” In addition to the vibrant background, the company added a 1 1/8 inches wide by 2 7/8 inches tall clear window to view the flashlight. I was pleased with the decision to include the window, as a flat image would not have provided an adequate feel for the features and quality of the light.

The iridescent blue right side panel listed six applications for the light (mountaineering, camping, construction, cycling, first aid, adventure), while the left side panel provided an SKU barcode and indicated which version of the light that I received (Cool White 6500K 6500 Lumens) versus the Neutral White 5000K CR190 2000 Lumen edition. The blue-colored back panel provided dual QR codes, which linked to the website and Facebook pages, contact information, and product manufacturing labels. The top orange panel provided the black hanging tab, while the bottom panel remained unadorned. Even though I truly enjoyed the packaging, I would have liked a small specifications table detailing the run times for the device (found in the instruction manual).
I lifted the lid, slid the clear plastic tray out from the box, and then removed the instruction manual and orange accessory box. Within the smaller box, you will find an 8-inches long USB-C to USB-A cable and a wrist lanyard. The small loop segment measured 1/16 inches wide by 2 1/4 inches long, while the longer black-mesh wrist segment measured 1/8 inches wide by 8 inches long. You will find a 3/4 inches long by 1/2 inches wide ACEBEAM plastic segment between the two loops. Lastly, ACEBEAM included a 9/16 inches diameter cord lock to reduce the chances of a drop. The only thing missing from the setup was a belt holster or carry bag.
I removed the 7-ounce Terminator M2 from the clear plastic tray and unscrewed the battery compartment at the base of the spotlight side. Like a portmanteau word combination, the 1 7/8 inches wide by 3 13/16 inches long by 1 1/4 inches thick flashlight appeared to be two flashlights smushed into one. The left-side spotlight and right-side floodlight produced two very distinct light distribution patterns and could easily be changed with a toggle of the switch along the lower front panel. Once the battery compartment was unscrewed, I removed the insulating film and the 1.8-ounce 3100 mah 18650 3.6V/11.2 WH battery.
The orange battery had an upper white border that displayed the ACEBEAM name and had a USB-C input port. I plugged the battery into a Klein tools multimeter with the included USB-C to USB-A cable and the multimeter into a standard 5V/2A adapter. I started the charging process at 10:12 PM (5.08V/1.14A) and noted that the red LED changed to green by 11:17 PM (5.09V/0.00A). I replaced the USB-C rechargeable battery into the port on the Terminator M2, reconnected the screw seal (with o-ring), and tested the light.

The dual modes of the Terminator M2 flashlight could be accessed through the black toggle along the top panel of the device. With the toggle up, you can enjoy the 3200 Lumen, 178-meter throw, four-brightness level Floodlight. Or, you can move the toggle into the down position to access the 500 meters, 62500 candelas, 900 lumens, single brightness Spotlight. To activate the light, place the toggle into the desired position and then single-press the tail cap button at the base of the left light (spotlight side). Starting in the floodlight mode, single press the tail switch to activate the light. You can press+hold the button to cycle between the four brightness levels.
Once the desired light output level is met, release the button to maintain the level of illumination. I liked that the light allowed for single-press on-off, and also retained the memory of the last mode when turned off. The 50-lumen low mode should last about 18.5 hours. I tested the three different times and found the light lasted anywhere from 17.5 to 19 hours. The 200-lumen medium1 mode (54-meter throw, 279 candelas) will last for about seven hours before dropping down to 50 lumens for another ~25 minutes. The 500-lumen medium2 mode (79-meter throw, 1560 candela) lasted for about 3 hours before tapering down to 50-lumen low mode for another 25 minutes before extinguishing. The 1200-lumen high mode (119 meter throw, 3540 candela) lasted for about 1.25 hours before dropping to the 50-lumen low mode for another 25 minutes. I tested each mode several times and found the runtimes to be quite accurate. Each mode proved to nearly exhaust the battery but still had some low runtime left.
As a bonus, the light had several additional modes, a moonlight mode, turbo mode, floodlight/spotlight combo mode, flood/spotlight strobe, seven-color automatic cycle, and AUX light modes. I kept the instruction manual as a reference and would advise against throwing it away. To access the moonlight mode, press and hold the tail switch for just under a second while the light is extinguished and in the Floodlight mode. The 1-lumen light should last for up to 38 hours on a single battery charge. If you hold the button beyond a second, you will enter into the seven-color automatic cycle. The mode will cycle between red, light green, dark green, light blue, dark blue, purple, and white modes.
If you press and hold the button again while in the cycling mode, you can alternate between the colors like the brightness levels mentioned above. Unfortunately, you can adjust the brightness of the colored LEDS beyond the 0.5-lumen base level. The runtime/duration of the light within the Aux mode was insane. The manual promised 300 hours in the seven colors, 383 hours in red, 437 hours in green, 491 hours in blue, 1194 hours in green signal mode, and 1042 hours in red SOS mode. The strobing on/off function extended the runtime to more than a month. You can single-press the tail cap when ready to end the mode. Unfortunately, the extra modes were not part of the memory function and you will have to cycle through the colors each time to return to the desired state.
You can access turbo mode (178 meter throw, 7921 candela) by double pressing the tail switch, while the light is activated and in the Floodlight mode. You can double-press the tail switch again to return to the previous memory mode. The turbo mode provided a 3200 lumen burst for ~110 seconds before stepping down to 1200 lumens after 70 minutes and then down to 50 lumens for another 25 minutes. The light did not drastically transition at exactly the listed times but did taper down over the approximate times listed within the manual. I tested these features several times and found that the battery was nearly exhausted after about 1.5 hours of the turbo mode sequence. Unlike the low/med1/med2/high modes above, the battery had very little juice after the tests.

You can toggle between the two main lights, by moving the magnetic control toggle up/down. It did not matter if the light was on/off during this process. The 900-lumen spotlight mode should last about 50 seconds before dropping to 400 lumens for another ~2 hours. The 500-meter throw, 62500-candela beam was much more coned down than the broad floodlight mode. Lastly, you can activate both lights from any of the modes by triple-pressing the tail switch, or both light-strobe modes by quadruple-pressing both modes.
The flood/spotlight high mode provided 2700 lumens for around a minute before dropping down to 1000 lumens (similar to the high flood mode) for another ~1.25 hours (440-meter throw, 48400 candella). The 1900-lumen strobe mode should last approximately 1.5 hours before turning off (350m/30625 candela). Beyond the modes mentioned above, the light also had a lock/unlock mode. From the off position, press and hold the tail switch for three seconds. The light will flash three times and then extinguish. If you press the tail switch, the indicator will flash red/green to alert you to the locked mode. You can press the tail switch again for three seconds to exit the mode.
The bezels of each of the lights had raised black borders to keep the glass from contacting surfaces. Additionally, the belt clip helped to keep the metallic surface elevated. If you leave the light in high/turbo or Flood+Spot modes, the surface will get very hot to the touch. The low/med1/med2 modes never felt hot enough to worry about. After leaving the light in high mode for 10 minutes, the surface temperature measured 107.2 degrees. This was warm enough to be slightly uncomfortable but not so warm as to burn. I placed the light into the box and left it in high mode for another 5 minutes. I tested the temperature and found it to be 123.4, which was hot enough to irritate and possibly burn the skin and damage/melt a jacket/bag.
Reduced airflow and prolonged illumination could further increase temperatures and damage the light or the container it is placed into. After leaving the light in flood+spotlight mode for 10 minutes, the temperature measured 130.7 degrees. Even though the dual mode maintains the 2700 lumens for only 50 seconds before dropping down to 1000 lumens, the surface was uncomfortably hot to the touch. If carrying the device in a bag/pocket, I would recommend placing it into the locked mode. Additionally, avoid looking into the light to prevent potential harm/damage to your eyes.

Overall, I truly enjoyed the design and layout of the flashlight. The left spotlight and right floodlight had small icons on the top panel to denote their function. You will find a small triangular caution icon along the bottom surface to alert you to the potential heated surface. I liked the hunter green metallic color, the silver-grey accents, the machine-cut edges, the green battery indicator along the side of the light, and the overall heft/feel of the light.
The left side edge of the light listed the www.acebeam.com address and provided a circular battery indicator. The right side panel listed a product QR code and serial number. The bottom panel provided a robust black-colored belt clip, which allowed for a bezel down carry option. I liked the lanyard but found that it got in the way and caught on things while attached to my belt. Thus, I subsequently removed it from the light. I would have preferred a sheath/holster for the light when using the lanyard.
Learn more about the Acebeam Terminator M2.








